|افزار پرداز اسپاد | فروش سرور HP | فروش سرور اچ پی | قیمت سرور اچ پی | فروش QNAP
فروش سرور | قیمت سرور | قیمت سرور HP | فروش سرور HP | فروش سرور اچ پی | خرید سرور | اسپاد | HP Proliant DL380 G10 | HP Proliant DL380 G8 | HP Server | HP Storage | HP Rack| HP Proliant DL380 G9 | تعمیرات سرور | قیمت سرور HP | قطعات سرورهای قدیمی HP | مرکز فروش و پشتیبانی سرورهای HP | قطعات سرور HP | قطعات سرور قدیمی | سرور دست دوم | سرور کارکرده | قطعات سرور |
HPE ProLiant ML350 Gen10
1 تومان
HPE ProLiant ML350 Gen10
شرکت اچ پی سرور جدید (HPE ProLiant ML350 Gen10) سری تاور معرفی کرده که می تواند به راحتی و قدرت محاسباتی بسیار زیاد تمام نیاز های یک سازمان را برطرف کند.
سرور نسل 10 اچ پی سری ML350 با بهرهگیری از سری پردازنده جدید اینتل زئون با مدل Intel Xeon Platinum , Gold , Silver , Bronze با قابلیت پشتیبانی از 4 core تا 28 core را دارا میباشد که در کنار 1.5 ترابایت حافظه رم و 24 اسلات رم DDR4 2666 MT/s میتواند عملیات پردازشی را سر و سامان دهد و عملکرد مناسبی در شبکه خواهد داشت .
Intel® Xeon® Scalable 8100 series Intel® Xeon® Scalable 6100 series Intel® Xeon® Scalable 5100 series Intel® Xeon® Scalable 4100 series Intel® Xeon® Scalable 3100 series
Processor family
1OR 2
Number of processors
4OR 6 OR 8 OR 10 OR 12 OR 14 OR 16 OR 18 OR 22 OR 24 OR 26 OR 28
Processor core available
HPE Smart Array E208i-a SR Gen10 Controller HPE Smart Array E208i-p SR Gen10 Controller HPE Smart Array E208e-p SR Gen10 Controller
—————————————————————————————–
HPE Smart Array P408i-a SR Gen10 Controller HPE Smart Array P408i-p SR Gen10 Controller HPE Smart Array P408e-p SR Gen10 Controller HPE Smart Array P816i-a SR Gen10 Controller
Essential RAID Controller
Performance RAID Controller
LRDIMM 24 x 64 GB LRDIMM @ 2600 MHz RDIMM 24 x 32 GB RDIMM @ 2600 MHz
3.0TB with 128 GB DDR4 DIMM
Memory, maximum
24 DIMM slots
DDR4 SmartMemory
Memory slots
Memory type
HPE iLO 5 ASIC
HPE Integrated Lights-Out – HPE iLO
SFF SAS 24 x 2 TB CAPACITY 48.0TB SFF SATA 24 x 2 TB CAPACITY 48.0TB LFF SAS 12 x 10 TB CAPACITY 120.0TB LFF SATA 12 x 10 TB CAPACITY 120.0TB
SFF SAS SSD 24 x 7.68 TB CAPACITY 184.32TB
SFF SATA SSD 24 x 3.84 TB CAPACITY 92.16TB
LFF SAS SSD 12 x 3.84 TB CAPACITY 46.08TB
LFF SATA SSD 12 x 3.84 TB CAPACITY 46.08TB
Non Hot Plug LFF SATA 12 x 4 TB CAPACITY 48.0TB
Hot Plug SFF NVMe PCIe SSD 8 x 2 TB NVMe CAPACITY 16TB NVMe
With Digitally Signed Firmware
Storage Drive description
(6) Maximum – For detail descriptions reference the QuickSpec
NOTE: Slot 4 is routed from the PCH available on the ML350-Gen10
Expansion slots
HPE Ethernet 1Gb 4-port 369i Adapter
Network controller
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Power supply type
4U tower with rack conversion capability
Form factor
برچسب ویژه : قیمت ML350 G10 , HP , سرور اج پی , استعلام قیمت سرور ML350 G10 , کانفیگ سرور ML350 Gen10, فروش ML350 G10, قطعات سرور ML350 G10, قیمت ML350 G10 تاور
Driving a wide range of workloads with a flexible, shorter and rackable chassis design that can fit in different physical environments, the secure 2P HPE ProLiant ML350 Gen10 Server delivers the ideal set of performance and expandability for changing business needs making it the choice for growing SMBs, remote/branch offices of large enterprises and data centers. Choose this 2P tower that grows with you in the digital economy.
Front View – SFF chassis with optional Gen10 8SFF HDD Cage Kits shown (Rack mode)
1.
Front button/LED (top-to-down in Rack mode shown): Power On/Stand-by button and System Power LED, System Health LED, NIC Status LED, UID Button/LED
2.
USB 3.0 port x 2
3.
iLO Service Port
4.
Box1: optional HDD Drive Cage Bay for additional 8 SFF drives support, or upgradeable to 2 HH media devices + 1 slim-line DVD.
5.
Serial number/iLO information pull tab
6.
Box2: optional HDD Drive Cage Bay for additional 8 SFF drives support, or upgradeable to 8 SFF NVMe Express Bay
7.
Box3: default with one 8 SFF HDD Drive Cage
Front View – LFF chassis with optional Gen10 4LFF HDD Cage Kits shown (Tower mode)
1.
Front button/LED (right-to-left in Tower mode shown): Power On/Stand-by button and System Power LED, System Health LED, NIC Status LED, UID Button/LED
2.
USB 3.0 port x 2
3.
iLO Service Port
4.
Box1: optional HDD Drive Cage Bay for additional 4 LFF drives support, or upgradeable to 2 HH media devices + 1 slim-line DVD
5.
Serial number/iLO information pull tab
6.
Box2: optional HDD Drive Cage Bay for additional 4 LFF drives support
7.
Box3: default with one 4LFF HDD Drive Cage
8.
Tower feet (foldable at servicing)
NOTE: For NHP LFF chassis, please find detail in the ML350 Gen10 User Guide.
Internal View – with optional 2nd CPU, Smart Array Modular Controller and Redundant Fan Kit shown
1.
CPU Socket 1 with one processor and heatsink, and 12 DDR4 DIMM slots for RDIMM or LRDIMM
2.
PCIe Slots (Slot 1-4, coming from CPU1): Slot 1 and 3 can support Optional GPU
3.
CPU Socket 2 with the 2nd processor and heatsink, (depending on server model, the 2nd processor can be Optional) and 12 DDR4 DIMM slots for RDIMM or LRDIMM
4.
PCIe Slots (Slot 5-8, coming from CPU2) (requires Optional 2nd processor): Slot 5 and 7 can support Optional GPU
5.
System fans: (2) fans along with the air baffle (not shown) are standard for basic cooling
6.
Optional (4) system fans are shown, supporting 2P and/or advanced cooling requirements.
HPE Flexible Slot 2 (Optional – empty with power supply blank shown)
6.
Or, support for HPE 500W Standard Non-Hot-Plug/non-RPS Power Supply, depending on model SKU
7.
PCI Slots (Slots 5-8) (requires Optional second processor) – Slot 5 and 7 can support Optional GPU
8.
Display Port
9.
Serial Port
10.
VGA Port
11.
Dedicated iLO Management Port (RJ45)
12.
Embedded 4 x 1GbE Network ports
13.
USB 3.0 port x 2
14.
Unit ID LED
15.
PCI Slots (Slots 1-4) – Slot 1 and 3 can support Optional GPU
16.
Tower feet (foldable at servicing)
17.
Kensington security slot
18.
Padlock eye
What’s New:
Re-designed chassis with reduced size offering increased flexibility to adapt to different workload needs and physical environments. Intel® Xeon® Processor Scalable processors, starting from Bronze thru Platinum, 4 – 28 Cores; 85 – 205W. 2600 MT/s HPE DDR4 SmartMemory RDIMM/LRDIMM, offering 8, 16, 32 or 64 GB. Increased number of SFF NVMe SSD support, up to 8. Security features: iLO 5 (Security Root of Trust); TPM 2.0; digitally signed FW HDD/SSD support Expanded GPU support
Platform Information
Form Factor
4U tower with rack conversion capability
NOTE: When deployed as a Rack model, this system will take up 5U-height space in a standard data center rack facility.
Chassis Types
8 SFF chassis with optional SFF HDD cage kit (s), NVMe Express Bay, half-height (5.25″?) media bay up to 2, and 1 slim-line DVD bay kit options 4 LFF chassis with optional LFF HDD cage kit (s), half-height (5.25″?) media bay up to 2, and 1 slim-line DVD bay kit options 4 LFF NHP chassis with optional LFF NHP HDD cage kit (s), half-height (5.25″?) media bay up to 2, and 1 slim-line DVD bay kit options
NOTE: The 8 SFF chassis can be upgraded with SFF HDD cage kit (s) to 16 or 24 SFF. Note a field upgrade to 24 SFF will require redundant fan kit (874572-B21).
NOTE: The 8 SFF NVMe Express Bay option (874569-B21) can only be leveraged in the SFF chassis and installed in Box 2. Maximum of 8 SFF NVMe PCIe drives are supported when two ML350 Gen10 NVMe Riser boards (shipped in 874569-B21) are populated. When only one Riser board is populated, then 4 NVMe drives are supported. Note a field upgrade to NVMe Express Bay will require redundant fan kit (874572-B21).
NOTE: The 4 LFF HP or NHP chassis can be upgraded with LFF HDD cage kit (s) or LFF NHP HDD cage kit (s) to 8 or 12 LFF. Note a field upgrade to 12 LFF either in LFF hot-plug or LFF non-hot-plug chassis will require redundant fan kit (874572-B21).
NOTE: The 8 SFF or 4 LFF or 4 LFF NHP chassis can be upgraded to add half-height media bay up to 2, and/or 1 slim-line DVD in Box1. Note a field upgrade to fully populate front storage bays (Box1, 2 and 3 fully loaded) will require redundant fan kit (874572-B21).
System Fans
Standard – fan types included
NOTE: 1P models typically ship with 2 standard fans located at system rear. These two fans are default inside every ML350 Gen10 unit and do NOT support hot-plug operations.
NOTE: 2P models typically ship with 6 standard fans which provides N+1 redundant fan feature in most of the situations. For support detail or restriction, refer to ML350 Gen10 User Guide.
NOTE: Optional redundant fan kit (874572-B21) provides advanced cooling and redundancy functionality in heavier configurations. Configurations that require this kit are provided in later sections. Refer to the User Guide for special configuration scenarios where this kit is required but does not provide redundancy feature.
Standard Features
Standard Features
Processors – Up to 2 of the following depending on model.
NOTE: For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.
12 DIMM slots per processor, 6 channels per processor, 2 DIMMs per channel
Maximum capacity (LRDIMM)
1.5 TB
24 x 64 GB LRDIMM @ 2600 MT/s
Maximum capacity (RDIMM)
768 GB
24 x 32 GB RDIMM @ 2600 MT/s
NOTE: The maximum memory by socket is limited by the processor selection.
NOTE: Mixing of RDIMM and LRDIMM memory is not supported.
Memory Protection
For details on the HPE Server Memory Options RAS feature, visit: http://www.hpe.com/docs/memory-ras-feature.
Expansion Slots
Slots #
Technology
Bus Width
Connector Width
Slot Form Factor
Notes
Full-height,
full-length slot
Proc 1
NOTE: Bus Width Indicates the number of physical electrical lanes running to the connector.
NOTE: Slot 4 is routed from the PCH.
Slots #
Technology
Bus Width
Connector Width
Slot Form Factor
Notes
NOTE: Bus Width Indicates the number of physical electrical lanes running to the connector.
NOTE: Max. 8 PCIe slots are available on the ML350 Gen10.
Storage Controllers
The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed breakout of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10 Controllers Data Sheet.
One of the following depending on model
Software RAID
HPE Smart Array S100i SR Gen10 SW RAID
NOTE: HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an additional controller will be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.
NOTE: HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled.
NOTE: The S100i uses 14 embedded SATA ports.
Essential RAID Controller
HPE Smart Array E208i-a SR Gen10 Controller
HPE Smart Array E208i-p SR Gen10 Controller
HPE Smart Array E208e-p SR Gen10 Controller
Performance RAID Controller
HPE Smart Array P408i-a SR Gen10 Controller
HPE Smart Array P408i-p SR Gen10 Controller
HPE Smart Array P408e-p SR Gen10 Controller
HPE Smart Array P816i-a SR Gen10 Controller
NOTE: Performance RAID Controllers require the HPE Smart Storage Battery (875241-B21) which is sold separately.
Internal Storage Devices
One of the following depending on model
Optical Drive
Optional slim-line DVD-ROM/DVD-RW up to 1
Optional half-height (5.25″?) RDX or tape/LTO devices up to 2
Hard Drives
None ship standard
Maximum Internal Storage
CAPACITY
CONFIGURATION
Hot Plug SFF SAS
48.0 TB
24 x 2 TB
Hot Plug SFF SATA
48.0 TB
24 x 2 TB
Hot Plug LFF SAS
120.0 TB
12 x 10 TB
Hot Plug LFF SATA
120.0 TB
12 x 10 TB
Hot Plug SFF SAS SSD
184.32 TB
24 x 7.68 TB
Hot Plug SFF SATA SSD
92.16 TB
24 x 3.84 TB
Hot Plug LFF SAS SSD
46.08 TB
12 x 3.84 TB
Hot Plug LFF SATA SSD
46.08 TB
12 x 3.84 TB
Non Hot Plug LFF SATA
48.0 TB
12 x 4 TB
Hot Plug SFF NVMe PCIe SSD
16 TB NVMe
8 x 2 TB NVMe
NOTE: NHP LFF SKU supports SATA hard disk drives only.
Power Supply
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Available in 94% efficiency.
HPE 500W Standard Non-Hot-Plug Power Supply Kit
NOTE: Available in 92% efficiency and supported in pre-configured models only. This power supply is available in a few pre-built system SKUs. Customers can still choose to upgrade to HPE Flex Slot RPS later by installing the ML350 Gen10 RPS enablement kit (874571-B21).
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Available in 94% and 96% efficiency.
NOTE: Also available in -48VDC and 227VAC/380VDC power inputs.
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Available in 94% efficiency.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to “right-size” a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid “trapped” power capacity in the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool.
For information on power specifications and technical content visit HPE Server power supplies.
Interfaces
Serial
1 standard (at system rear)
VGA Port
1 standard (at system rear)
Display Port
1 standard (at system rear)
Embedded Network Ports
4 x 1 Gb ports shipping standard, with optional stand up card
HPE iLO Remote Management Network Port
1 Gb Dedicated
Front iLO Service Port
1 standard
Micro SD Slot
1 Micro SD (internal)
NOTE: The Micro SD slot is not a hot-pluggable device. Customers should not attempt to plug an SD card into the SD slot while the server is powered.
USB 3.0/2.0
6 total, standard: 2 front (USB 3.0), 2 rear (USB 3.0), 2 internal (1 x USB 3.0 & 1 x USB 2.0)
Operating Systems and Virtualization Software Support for ProLiant Servers
Windows Server 2012 R2 (Most Recent Version)
Windows Server 2016 (Most Recent Version)
VMware ESXi 6.0 U3
VMware ESXi 6.5 and U1 upon release
Red Hat Enterprise Linux (RHEL) 6.9 and 7.3
SUSE Linux Enterprise Server (SLES) 11 SP4 and 12 SP2
ClearOS
HPE and ClearCenter will help you lower the cost of building on-premise solutions without sacrificing security and ease of use. HPE ProLiant servers with ClearOS give you a simple, secure, and affordable operating system with an intuitive web based graphical user interface that provides a cloud-like experience on- premise, and an Application Marketplace with over 100 apps and growing. Whether you’re starting out or scaling, you decide what applications you need and pay as you grow.
NOTE: ClearOS allows you to build a fully functional server that is just right for you at no upfront cost.
For more information on ClearOS, please visit http://www.hpe.com/servers/clearos.
CentOS
NOTE: CentOS is not directly supported / Community Supported (Based on RHEL so RHEL testing and enablement applicable to CentOS) CentOS 6.9 / CentOS 7.3.
NOTE: For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server. http://h20566.www2.hpe.com/portal/site/hpsc/public/psi/home?sp4ts.oid=1010026818.
Industry Standard Compliance
ACPI 6.1 Compliant
PCIe 3.0 Compliant
WOL Support
Microsoft® Logo certifications
PXE Support
VGA Display Port
USB 3.0 Compliant
USB 2.0 Compliant
Energy Star
SMBIOS 3.1
UEFI 2.6
Redfish API
IPMI 2.0
Secure Digital 2.0
Advanced Encryption Standard (AES)
Triple Data Encrytion Standard (3DES)
SNMP v3
TLS 1.2
DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)
Active Directory v1.0
ASHRAE A3/A4
NOTE: For additional technical thermal details regarding ambient temperatures, humidity and features support please visit: http://www.hpe.com/servers/ashrae.
NOTE: UEFI is the default setting for the ML350 Gen10. Legacy mode can be selected in the field or as a CTO option (758959-B22).
Graphics
Integrated Video Standard
Video modes up to 1920 x 1200@60Hz (32 bpp) 16MB Video Memory HPE iLO 5 on system management memory
32 MB Flash 4 Gbit DDR 3 with ECC protection
HPE Server UEFI/Legacy ROM
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen10 servers have a UEFI Class 2 implementation and support both UEFI Mode (default) and Legacy BIOS Mode.
NOTE: The UEFI System Utilities tool is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more information, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
Secure Boot and Secure Start enable for enhanced security Operating system specific functionality Support for > 2.2 TB (using GPT) boot drives USB 3.0 Stack Embedded UEFI Shell Mass Configuration Deployment Tool using iLO RESTful API that is Redfish API Conformant PXE boot support for IPv6 networks Workload Profiles for simple performance optimization UEFI Boot Mode only:
TPM 2.0 Support NVMe Boot Support Platform Trust Technology (PTT) can be enabled. iSCSI Software Initiator Support. HTTP/HTTPs Boot support as a PXE alternative. Boot support for option cards that only support a UEFI option ROM NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI.
NOTE: UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory for your HPE ProLiant Gen10 Server.
Embedded Management
HPE Integrated Lights-Out (HPE iLO)
Monitor your servers for ongoing management, service alerting, reporting and remote management with HPE iLO. Learn more at http://www.hpe.com/info/ilo.
UEFI
Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI). Learn more at http://www.hpe.com/servers/uefi.
Intelligent Provisioning
Hassle free server and OS provisioning for 1 or more servers with Intelligent Provisioning. Learn more at http://www.hpe.com/servers/intelligentprovisioning.
iLO RESTful API
iLO RESTful API is Redfish API conformance and offers simplified server management automation such as configuration and maintenance tasks based on modern industry standards. Learn more at http://www.hpe.com/info/restfulapi.
Server Utilities
Active Health System
The HPE Active Health System (AHS) is an essential component of the iLO management portfolio that provides continuous, proactive health monitoring of HPE servers. Learn more at http://www.hpe.com/servers/ahs.
Active Health System Viewer
Use the Active Health System Viewer, a web-based portal, to easily read AHS logs and speed problem resolution with HPE self-repair recommendations, to learn more visit: http://www.hpe.com/servers/ahsv.
Smart Update
Keep your servers up to date with the HPE Smart Update solution by using Smart Update Manager (SUM) to optimize the firmware and driver updates of the Service Pack for ProLiant (SPP). Learn more at http://www.hpe.com/info/smartupdate.
iLO Amplifier Pack
Designed for large enterprise and service provider environments with hundreds of HPE servers, the iLO Amplifier Pack is a free, downloadable open virtual application (OVA) that delivers the power to discover, inventory and update Gen8, Gen9 and Gen10 HPE servers at unmatched speed and scale. Use with an iLO Advanced License to unlock full capabilities. Learn more at http://www.hpe.com/servers/iLOamplifierpack.
HPE iLO Mobile Application
Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit: http://www.hpe.com/info/ilo/mobileapp.
https://espadco.com
RESTful Interface Tool
RESTful Interface tool (iLOREST) is a single scripting tool to provision using iLO RESTful API to discover and deploy servers at scale. Learn more at http://www.hpe.com/info/resttool.
Scripting Tools
Provision one to many servers using your own scripts to discover and deploy with Scripting Tool (STK) for Windows and Linux or Scripting Tools for Windows PowerShell. Learn more at http://www.hpe.com/servers/stk or http://www.hpe.com/servers/powershell.
HPE OneView Standard
HPE OneView Standard can be used for inventory, health monitoring, alerting, and reporting without additional fees. It can monitor multiple HPE server generations. The user interface is similar to the HPE OneView Advanced version, but the software-defined functionality is not available. Learn more at http://www.hpe.com/info/oneview.
HPE Systems Insight Manager (HPE SIM)
Ideal for environments already using HPE SIM, it allows you to monitor the health of your HPE ProLiant Servers and HPE Integrity Servers. Also provides you with basic support for non-HPE servers. HPE SIM also integrates with Smart Update Manager to provide quick and seamless firmware updates. Learn more at http://www.hpe.com/info/hpesim.
Security
UEFI Secure Boot and Secure Start support
Immutable Silicon Root of Trust
FIPS 140-2 validation (iLO 5 certification in progress)
Common Criteria certification (iLO 5 certification in progress)
Configurable for PCI DSS compliance
Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser
Support for Commercial National Security Algorithms (CNSA)
Tamper-free updates – components digitally signed and verified
Secure Recovery – recover critical firmware to known good state on detection of compromised firmware
Ability to rollback firmware
Secure erase of NAND/User data
TPM (Trusted Platform Module) 1.2 option
TPM (Trusted Platform Module) 2.0 option
Front bezel key-lock feature – standard, available in both Tower and Rack models
Padlock slot, standard
Kensington Lock slot, standard
Warranty
This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of HPE Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HPE Pointnext operational services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no charge. 3) Non CSR parts must be serviced by a trained authorized service engineer. Additional information regarding worldwide limited warranty and technical support is available at: http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/.
Optional Features
Server Management
HPE iLO Advanced
HPE iLO Advanced licenses offer smart remote functionality without compromise, for all HPE ProLiant servers. The license includes the full integrated remote console, virtual keyboard, video, and mouse (KVM), multi-user collaboration, console record and replay, and GUI-based and scripted virtual media and virtual folders. You can also activate the enhanced security and power management functionality. Learn more about HPE iLO Advanced at http://www.hpe.com/servers/iloadvanced.
HPE iLO Advanced Premium Security Edition
HPE iLO Advanced Premium Security Edition for iLO 5 includes iLO Advanced License plus high-end security modes, unique security capabilities, like Automatic FW recovery; Runtime FW verification, and Secure erase. Learn more about HPE iLO Advanced Premium Security Edition at: http://www.hpe.com/servers/ilopremium.
HPE OneView Advanced
HPE OneView brings a new level of automation to infrastructure management by taking a template driven approach to provisioning, updating, and integrating compute, storage, and networking infrastructure. It provides full-featured licenses which can be purchased for managing Gen8, Gen9 and Gen10 servers. To learn more visit http://www.hpe.com/info/oneview.
HPE Insight Cluster Management Utility (CMU)
HPE Insight Cluster Management Utility is a HyperScale management framework that includes software for the centralized provisioning, management and monitoring of nodes and infrastructure. Learn more at http://www.hpe.com/info/cmu.
Accelerator and GPGPU Information
Hewlett Packard Enterprise supports various accelerators on select HPE Proliant servers to support different workloads. The accelerators enable seamless integration of GPU computing with HPE ProLiant servers for high-performance computing, large data center graphics, deep learning and virtual desktop deployments. These accelerators deliver all of the standard benefits of GPU computing while enabling maximum reliability and tight integration with system monitoring and management tools such as HPE Insight Cluster Management Utility.
Rack and Power Infrastructure
The story may end with servers, but it starts with the foundation that makes compute go – and business grow. We’ve reinvented our entire portfolio of rack and power products to make IT infrastructure more secure, more practical, and more efficient. In other words, we’ve created a stronger, smarter, and simpler infrastructure to help you get the most out of your IT equipment. As an industry leader, Hewlett Packard Enterprise is uniquely positioned to address the key concerns of power, cooling, cable management and system access.
HPE G2 Advanced and Enterprise Racks are perfect for the server room or today’s modern data center with enhanced airflow and thermal management, flexible cable management, and a 10 year Warranty to support higher density computing.
HPE G2 PDUs offer reliable power in flexible form factors that operate at temperatures up to 60°, include color-coded outlets and load segments and a low-profile design for optimal access to the rack and support for dense rack environments.
HPE Uninterruptible Power Systems are cost-effective power protection for any type workload. Some UPSs include options for remote management and extended runtime modules so you’re critical dense data center is covered in power outages.
HPE KVM Solutions include a console and switches designed to work with your server and IT equipment reliably. We’ve got a cost-effective KVM switch for your first rack and multiple connection IP switches with remote management and security capabilities to keep your data center rack up and running.
Learn more about HPE Racks, KVM, PDUs and UPSs at HPE Rack and Power Infrastructure.
One Config Simple (SCE)
SCE is a guided self-service tool to help sales and non-technical people provide customers with initial configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in your existing ordering processes. If you require “custom” rack configuration or configuration for products not available in SCE, please contact Hewlett Packard Enterprise Customer Business Center or an Authorized Partner for assistance. https://h22174.www2.hpe.com/SimplifiedConfig/Welcome#
Service and Support
HPE Pointnext – Service and Support
Protect your business beyond warranty with HPE Support Services
HPE Pointnext provides a comprehensive portfolio including Advisory and Transformational, Professional, and Operational Services to help accelerate your digital transformation. From the onset of your transformation journey, Advisory and Transformational Services focus on designing the transformation and creating a solution roadmap. Professional Services specializes in creative configurations with flawless and on-time implementation, and on-budget execution. Finally, operational services provides innovative new approaches like Flexible Capacity and Datacenter Care, to keep your business at peak performance. HPE is ready to bring together all the pieces of the puzzle for you, with an eye on the future, and make the complex simple.
Connect your devices:
Unlock all of the benefits of your technology investment by connecting your products to Hewlett Packard Enterprise. Reduce down time and improve diagnostic accuracy with a single consolidated view of your environment. By connecting, you will receive 24x7monitoring, pre-failure alerts, automatic call logging, and automatic parts dispatch. HPE Proactive Care Service and HPE Datacenter Care Service customers will also benefit from proactive activities to help prevent issues and increase optimization. All of these benefits are already available to you with your server storage and networking products, securely connected to HPE support.
Learn more about getting connected at http://www.hpe.com/services/getconnected
Other related Services
HPE Server Hardware Installation Provides for the basic hardware installation of HPE branded servers, storage devices and networking options to assist you in bringing your new hardware into operation in a timely and professional manner.
Parts and Materials HPE will provide HPE-supported replacement parts and materials necessary to maintain the covered hardware product in operating condition, including parts and materials for available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage limitations as set forth in the manufacturer’s operating manual, product QuickSpecs, or the technical product data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HPE due to malfunction.
HPE Education Services
Keep your IT staff trained making sure they have the right skills to deliver on your business outcomes. Book on a class today and learn how to get the most from your technology investment. http://www.hpe.com/ww/learn
HPE Support Center The HPE Support Center is a personalized online support portal with access to information, tools and experts to support HPE business products. Submit support cases online, chat with HPE experts, access support resources or collaborate with peers. Learn more http://www.hpe.com/support/hpesc
HPE’s Support Center Mobile App* allows you to resolve issues yourself or quickly connect to an agent for live support. Now, you can get access to personalized IT support anywhere, anytime. HPE Insight Remote Support and HPE Support Center are available at no additional cost with a HPE warranty, HPE Support Service or HPE contractual support agreement.
*HPE Support Center Mobile App is subject to local availability.
8 SFF chassis with optional SFF HDD Cage Kit (874568-B21),
upgradeable to 24 SFF.
Opt. 8 SFF NVMe Express Bay Kit (874569-B21)
Optical Drive Bay
Optional Slimline ODD Bay Kit (874577-B21) for SATA DVD-ROM/DVD-RW optical drive
Optional Media Drive Support Kit (874570-B21) for RDX or tape/LTO devices, up to 2
Optical Drive
None ship as standard
PCI-Express Slots
8-slots (x16, x8, x16, x8, x16, x8, x16, x8) as standard
Power Supply
2x 800W HPE FlexSlot power supply (1+1)
Fans
6 standard fans
Management
HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard (requires download); HPE iLO Advanced, HPE iLO Advanced Premium Security Edition, and HPE OneView Advanced (require licenses)
Energy Star
2.1 certified
Form Factor
5U Rack
4U Tower
Warranty
3-year parts, 3-year labor, 3-year onsite support with next business day response
Country Code Key
xx1 = 001
US
xx1 = 031
UK
xx1 = 421
EU
xx1 = 371
AP
xx1 = 291
Japan
xx1 = AA1
PRC
xx1 = B21
Worldwide
NOTE: Not all models are available in all regions. Check with your local country Hewlett Packard Enterprise offices for availability.
Configuration Information – Factory Integrated Models
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for information on configurable product offerings and requirements. 1. Factory Integrated Models must start with a CTO Server.
2. FIO indicates that this option is only available as a factory installable option.
3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives ordered with the server.
4. Some options may not be integrated at the factory. Contact your local sales representative for additional information.
Step 1: Base Configuration (choose one of the following configurable models)
CTO Server
HPE ML350 Gen10 4 LFF CTO Server
HPE ML350 Gen10 8 SFF CTO Server
HPE ML350 Gen10 8 SFF Rack CTO Server
SKU Number
877625-B21
877626-B21
877627-B21
Processor Sockets
Two as standard
Two as standard
Two as standard
Processor
Not included as standard
Not included as standard
Not included as standard
DIMM Slots
24-DIMM slots
24-DIMM slots
24-DIMM slots
Storage Controller
Embedded SW RAID S100i with 14 SATA ports, choice of HPE modular Smart Array (AROC) and/or PCIe Standup controller card (s)
PCIe
8 PCIe Gen3 slots (x16, x8, x16, x8, x16, x8, x16, x8) as standard
HPE iLO with Intelligent Provisioning (standard), iLO Advances and OneView (optional)
USB
6x 3.0/2.0 standard plus front iLO Service Port
6x 3.0/2.0 standard plus front iLO Service Port
6x 3.0/2.0 standard plus front iLO Service Port
Tower-to-Rack conversion kit
Optional
Optional
Easy Install rack-rail tray (1U) with CMA included as standard
NOTE: Refer to HPE Power Advisor Tool to review the power requirement for your selected configuration and determine what power supply module(s) to select.
Additional drive cages
Optional 4 LFF HDD Cage kit, up to 2 (total of 3)
Optional 8 SFF HDD Cage kit, up to 2 (total of 3)
Optional 8 SFF HDD Cage kit, up to 2 (total of 3)
Half-Height Media Bay
2 Optional
2 Optional
2 Optional
ODD
1 Optional
1 Optional
1 Optional
Redundant Fan Cage Kit
Optional
Optional
Included as standard – total 6 fans included
8 SFF NVMe Express Bay
Not available
Optional, up to 1
Optional, up to 1
NOTE: This aplies to CTO configurations, field upgrades may differ depending on field configuration.
NOTE: The HH Media Bay (2) and slim ODD Bay together takes up the space of one 4 LFF or 8 SFF drive cage, which means when media bay, ODD or both is selected, the max. drive cage installation will be 2.
NOTE: To get advanced cooling in richer configurations and/or under certain ambient environmental conditions, the Redundant Fan Cage Kit (874572-B21) which consists of one fan cage with 4 additional fans, is REQUIRED. Refer to the Redundaunt Fan Kit section or ML350 Gen10 User Guide for detail.
Step 2a: Choose Required Options – Processors
(only one of the following unless otherwise noted)
Please select one -L21 processor required below.
For second processor, please select the same processor model with -B21 from Core Options – HPE Processors section.
For example: first processor, select 874752-L21 then for second processor, select 874752-B21.
NOTE: 1P models typically ship with 2 standard fans. 2P models will require selection of the Redundant Fan Cage kit (874572-B21) which contains one fan cage along with 4 additional fans – total number of fans required in the system will be 6.
NOTE: Maximum memory capacity per processor is dependent on processor models. All processors support up to 768 GB max memory per processor except”M”? model processors will support up to 1.5 TB max memory per processor.
NOTE: Mixing of 2 different processor models are NOT allowed.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: Processors higher than 85W will ship with the Performance heat sink. All other processors will ship with the Standard heat sink.
NOTE: Processors above 85W use a Performance Heatsink.
Step 2b: Choose Memory Options
Please select one or more memory from below.
For new Gen10 memory population rule whitepaper and optimal memory performance guidelines, please go to: https://www.hpe.com/docs/memory-population-rules
For Gen10 memory speed table, please go to: https://www.hpe.com/docs/memory-speed-table
For memory Reliability, Accessibility, Serviceability (RAS) features whitepaper like Gen10 Fast Fault Tolerance and legacy mirrored memory feature etc. please go to: http://www.hpe.com/docs/memory-ras-feature
NOTE: Memory DIMM availability with a server platform is dependent upon completion of certification testing.
NOTE: The maximum memory speed is a function of the memory type, memory configuration, and processor model.
One of the following from each list may be selected if desired at time of factory integration.
HPE Unique Options
HPE ML350 Gen10 8SFF Hot Plug Drive Backplane Cage Kit
874568-B21
NOTE: Add additional 8 SFF hot-plug hard drive cage, allowing for up to 24 SFF drive support (8+8+8).
HPE ML350 Gen10 4LFF Hot Plug Drive Backplane Cage Kit
874566-B21
NOTE: Add additional 4 LFF hot-plug hard drive cage, allowing for up to 12 LFF drive support (4+4+4).
HPE ML350 Gen10 8SFF NVMe SSD Express Bay Enablement Kit with 2x4NVMe Risers and Support Cables
874569-B21
NOTE: This kit contains two x4 Direct Attach PCIe NVMe Riser Boards with each supporting up to 4 drives. When both Riser Boards are installed, the system supports up to 8 SFF NVMe drives.
NOTE: NVMe SSDs to be ordered separately.
NOTE: NVMe drives require the addition of HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21).
HPE ML350 Gen10 RDX/LTO Media Drive Support Cable Kit with Fan Blank for Long LTO
874570-B21
NOTE: Supporting cables to add additional RDX/tape devices for data backup or archiving.
NOTE: RDX/tape devices to be ordered separately
HPE ML350 Gen10 Slimline ODD Bay and Support Cable Kit
874577-B21
NOTE: Mechanical converter with supporting cable.
HPE Legacy FIO Mode Setting
758959-B22
NOTE: UEFI is the default, this FIO part can be used for CTO to enable Legacy mode.
HPE Converged Infrastructure Management Software
HPE OneView for ProLiant DL Server including 3yr 24×7 Support FIO Bundle Physical 1-server LTU
E5Y43A
HPE OneView w/o iLO including 3yr 24×7 Support 1-server FIO LTU
P8B31A
Step 4: Choose additional options for Factory Integration from Core and Additional Options sections below
Core Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for additional information. Note the Cabling Matrix can help to explain the cable routing for each option.
HPE Unique Options
HPE ML350 Gen10 8SFF Hot Plug Drive Backplane Cage Kit
874568-B21
NOTE: Add additional 8 SFF Hot-Plug Hard Drive Cage, allowing for up to 24 SFF Drive support (8+8+8).
HPE ML350 Gen10 4LFF Hot Plug Drive Backplane Cage Kit
874566-B21
NOTE: Add additional 4 LFF Hot-Plug Hard Drive Cage, allowing for up to 12 LFF Drive support (4+4+4).
HPE ML350 Gen10 4LFF Non Hot Plug Drive Cage Kit
874567-B21
NOTE: Field upgrade only. Add additional 4 LFF Non-Hot-Plug Hard Drive Cage, allowing for up to 12 LFF NHP Drive support (4+4+4).
HPE ML350 Gen10 8SFF NVMe SSD Express Bay Enablement Kit with 2x4NVMe Risers and Support Cables
874569-B21
NOTE: This kit contains two x4 Direct Attach PCIe NVMe Riser Boards with each supporting up to 4 drives. When both Risers are installed, it supports 8 SFF NVMe drives.
NOTE: SFF NVMe SSDs to be ordered separately.
NOTE: NVMe drives require the addition of HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21).
HPE ML350 Gen10 RDX/LTO Media Drive Support Cable Kit with Fan Blank for Long LTO
874570-B21
NOTE: Supporting cables to add additional RDX/tape devices for data backup or archiving.
NOTE: RDX/tape devices to be ordered separately.
HPE ML350 Gen10 Slimline ODD Bay and Support Cable Kit
874577-B21
NOTE: Mechanical converter with supporting cable.
HPE ML350 Gen10 Embedded SATA Cable Kit for LFF Configuration
877578-B21
HPE ML350 Gen10 Embedded SATA Cable Kit for SFF Configuration
877579-B21
HPE ML350 Gen10 AROC Mini-SAS Cable Kit for LFF Configuration
874573-B21
HPE ML350 Gen10 AROC Mini-SAS Cable Kit for SFF Configuration
HPE ML350 Gen10 12Gb SAS Expander Card Kit with Cables
874576-B21
HPE ML350 Gen10 Redundent Fan Cage Kit with 4 Fan Modules
874572-B21
NOTE: Add additional 4 hot-plug fans installed in the fan cage to get N+1 fan redundancy and/or for advanced cooling. Refer to later section for detail.
HPE ML350 Gen10 Flex Slot Redundant Power Supply Cage Kit with Power Distribution Board
874571-B21
NOTE: Field upgrade only. Allowing field upgrade from the 500W standard PSU/non-hot-plug/non-RPS to support HPE Flex Slot RPS.
HPE ML350 Gen10 GPU External Power Cable Kit
877628-B21
NOTE: Consists of two external power cables to feed power to GPU modules with TDP larger than 75W.
HPE ML Gen10 Tower to Rack Conversion Kit with Sliding Rail Rack Shelf and Cable Management Arm
874578-B21
NOTE: This kit is supported in both ML350 and ML110 Gen10.
NOTE: Up to two processors supported. Performance Models include two processors.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo2: Intel® Turbo Boost Technology 2.0 provides more computing power when you need it with performance that adapts to spikes in your workload and delivers more performance upside than then previous generation turbo technology.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
NOTE: The xxxxxx-L21 is the first processor shipped, the xxxxxx-B21 is the 2nd processor and ships with 2 additional fans for factory of field installation.
NOTE: Maximum memory per socket depends on the processor selected.
NOTE: Processors above 85W use a Performance Heatsink.
NOTE: 2P models require the Redundant Fan Cage kit (874572-B21) which consists of one fan cage along with 4 additional fans.
Memory Selection
To streamline the configuration process for HPE ProLiant Gen10 servers and to provide the best product availability, HPE recommends memory from the list located here: http://www.hpe.com/products/recommend.
Best product availability is limited to US, Canada, and Latin America at this time.
NOTE: Memory DIMM availability with a server platform is dependent upon completion of certification testing.
NOTE: The maximum memory speed is a function of the memory type, memory configuration, and processor model.
HPE Optical Drives
HPE 9.5mm SATA DVD-ROM JackBlack Gen9 Optical Drive
726536-B21
NOTE: The HPE ML350 Gen10 Slimline ODD Bay Kit (874577-B21) is required for this option.
HPE 9.5mm SATA DVD-RW JackBlack G9 Optical Drive
726537-B21
NOTE: The HPE ML350 Gen10 Slimline ODD Bay Kit (874577-B21) is required for this option.
HPE Mobile USB Non Leaded System DVD RW Drive
701498-B21
NOTE: This is only supported on USB 3.0 ports.
NOTE: When front drive cages are fully populated (Box 1 – 3) and there is still the requirement for DVD-RW support, this external USB DVD-RW option will meet that need.
HPE Drives
Enterprise – 12G SAS – SFF Drives
HPE 300GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD
870753-B21
HPE 300GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD
872475-B21
HPE 600GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD
870757-B21
HPE 600GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty 512e Digitally Signed Firmware HDD
870763-B21
HPE 600GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD
872477-B21
HPE 900GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD
870759-B21
HPE 900GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty 512e Digitally Signed Firmware HDD
870765-B21
HPE 1.2TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD
872479-B21
HPE 1.8TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty 512e Digitally Signed Firmware HDD
872481-B21
HPE 2.4TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty 512e Digitally Signed Firmware HDD
881457-B21
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required for 10K, 15K or higher RPM SAS drives.
Enterprise – 12G SAS – LFF Drives
HPE 300GB SAS 12G Enterprise 15K LFF (3.5in) LPC 3yr Wty Digitally Signed Firmware HDD
870755-B21
HPE 900GB SAS 12G Enterprise 15K LFF (3.5in) LPC 3yr Wty Digitally Signed Firmware HDD
870761-B21
Midline – 12G SAS – SFF Drives
HPE 1TB SAS 12G Midline 7.2K SFF (2.5in) SC 1yr Wty Digitally Signed Firmware HDD
832514-B21
HPE 1TB SAS 12G Midline 7.2K SFF (2.5in) SC 1yr Wty 512e Digitally Signed Firmware HDD
To streamline the configuration process for HPE ProLiant Gen10 servers and to provide the best product availability, HPE recommends SSDs from the list located here: http://www.hpe.com/products/recommend.
Best product availability is limited to US, Canada, and Latin America at this time.
To further assist with configuration, HPE also offers an SSD Selector Tool located here: http://ssd.hpe.com.
Write Intensive – 12G SAS – SFF – Solid State Drives
HPE 400GB SAS 12G Write Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
873351-B21
HPE 800GB SAS 12G Write Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
873355-B21
HPE 1.6TB SAS 12G Write Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
873357-B21
Read Intensive – 12G SAS – SFF – Solid State Drives
HPE 960GB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
872390-B21
HPE 1.92TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
872392-B21
HPE 3.84TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
872394-B21
HPE 7.68TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
870144-B21
Read Intensive – 6G SATA – SFF – Solid State Drives
HPE 240GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
868814-B21
HPE 240GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
877740-B21
HPE 240GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
875503-B21
HPE 480GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
875509-B21
HPE 480GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
877746-B21
HPE 480GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
868818-B21
HPE 960GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
877752-B21
HPE 960GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
868822-B21
HPE 960GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
875511-B21
HPE 1.92TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
877758-B21
HPE 1.92TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
875513-B21
HPE 1.92TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
868826-B21
HPE 3.8TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
868830-B21
HPE 3.84TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
877764-B21
Mixed Use – 12G SAS – SFF – Solid State Drives
HPE 400GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
872374-B21
HPE 400GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
873359-B21
HPE 800GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
872376-B21
HPE 800GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
873363-B21
HPE 1.6TB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
872382-B21
HPE 1.6TB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
873365-B21
HPE 3.2TB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
872386-B21
HPE 3.2TB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
873367-B21
Mixed Use – 6G SATA – SFF – Solid State Drives
HPE 240GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
880295-B21
HPE 480GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
877776-B21
HPE 480GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
875470-B21
HPE 480GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
872344-B21
HPE 960GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
872348-B21
HPE 960GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
877782-B21
HPE 960GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
875474-B21
HPE 1.92TB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
877788-B21
HPE 1.92TB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
875478-B21
HPE 1.92TB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
872352-B21
Read Intensive – 6G SATA – LFF – Solid State Drives
HPE 480GB SATA 6G Read Intensive LFF (3.5in) LPC 3yr Wty Digitally Signed Firmware SSD
869056-B21
HPE 960GB SATA 6G Read Intensive LFF (3.5in) LPC 3yr Wty Digitally Signed Firmware SSD
877756-B21
HPE 1.92TB SATA 6G Read Intensive LFF (3.5in) LPC 3yr Wty Digitally Signed Firmware SSD
877762-B21
HPE 1.92TB SATA 6G Read Intensive LFF (3.5in) LPC 3yr Wty Digitally Signed Firmware SSD
869058-B21
Mixed Use – 12G SAS – LFF – Solid State Drives
HPE 800GB SAS 12G Mixed Use LFF (3.5in) LPC 3yr Wty Digitally Signed Firmware SSD
872380-B21
HPE 1.6TB SAS 12G Mixed Use LFF (3.5in) LPC 3yr Wty Digitally Signed Firmware SSD
872384-B21
M.2 Selection
NOTE: Requires the M.2 universal enablement card kit (878783-B21) and use S100i SATA controller only.
NOTE: Installation of the M.2 universal enablment card kit is limited to PCIe slot 1, 2, 3 or 4. Max. in ML350 Gen10 is one M.2 enablment card kit.
NOTE: M.2 supports Software RAID only.
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required for M.2 drives support.
Mixed Use – 6G SATA – M.2 – Solid State Drives
HPE 240GB SATA 6G Mixed Use M.2 2280 3yr Wty Digitally Signed Firmware SSD
875488-B21
HPE 480GB SATA 6G Mixed Use M.2 2280 3yr Wty Digitally Signed Firmware SSD
875490-B21
HPE 960GB SATA 6G Mixed Use M.2 2280 3yr Wty Digitally Signed Firmware SSD
875492-B21
HPE 1.92TB SATA 6G Mixed Use M.2 2280 3yr Wty Digitally Signed Firmware SSD
875494-B21
NOTE: Requires the M.2 universal enablement card kit (878783-B21) and use S100i SATA controller only.
NOTE: M.2 supports Software RAID only.
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required for M.2 drives.
Read Intensive – 6G SATA – M.2 – Solid State Drives
HPE 150GB SATA 6G Read Intensive M.2 2280 3yr Wty Digitally Signed Firmware SSD
875317-B21
HPE 480GB SATA 6G Read Intensive M.2 2280 3yr Wty Digitally Signed Firmware SSD
875319-B21
HPE 480GB SATA 6G Read Intensive M.2 2280 3yr Wty Digitally Signed Firmware SSD
875498-B21
HPE 960GB SATA 6G Read Intensive M.2 2280 3yr Wty Digitally Signed Firmware SSD
875500-B21
HPE 1.92GB SATA 6G Read Intensive M.2 2280 3yr Wty Digitally Signed Firmware SSD
875496-B21
NOTE: Requires the M.2 universal enablement card kit (878783-B21) and use S100i SATA controller only.
NOTE: M.2 supports Software RAID only.
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required for M.2 drives.
NVMe SSD Selection
NOTE: HPE ML350 Gen10 NVMe 8SFF Exp Bay Kit (874569-B21) is required to support these drives.
NOTE: Max. support is one Gen10 ML350 NVMe 8SFF Exp Bay Kit (874569-B21) which can support up to 8 NVMe solid state drives.
NOTE: NVMe support is limited in SFF systems.
NOTE: NVMe drives require the addition of HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21).
NOTE: Not supported by HPE Smart Array controllers.
NOTE: HPE has qualified the NVMe drive portfolio using the Operating System inbox drivers, full detail on the HPE Solid State Drive QuickSpecs.
HPE 400GB NVMe x4 Lanes Mixed Use SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware SSD
875593-B21
HPE 800GB NVMe x4 Lanes Mixed Use SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware SSD
875595-B21
HPE 1.6TB NVMe x4 Lanes Mixed Use SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware SSD
875597-B21
HPE 1.6TB NVMe x4 Lanes Mixed Use SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware SSD
877994-B21
Hard Drive Blank Kits
HPE Small Form Factor Hard Drive Blank Kit
666987-B21
HPE Gen9 LFF HDD Spade Blank Kit
807878-B21
Hard Drive Kits
HPE ML350 Gen10 8SFF Hot Plug Drive Backplane Cage Kit
874568-B21
NOTE: Add add’l 8 SFF Hot-Plug Hard Drive Cage, allowing for up to 24 SFF Drive support (8+8+8).
HPE ML350 Gen10 4LFF Hot Plug Drive Backplane Cage Kit
874566-B21
NOTE: Add add’l 4 LFF Hot-Plug Hard Drive Cage, allowing for up to 12 LFF Drive support (4+4+4).
HPE ML350 Gen10 4LFF Non Hot Plug Drive Cage Kit
874567-B21
NOTE: Field upgrade only. Add add’l 4 LFF Non-Hot-Plug Hard Drive Cage, allowing for up to 12 LFF Drive support (4+4+4).
HPE Universal SATA HHHL 3yr Wty M.2 Kit
878783-B21
NOTE: HPE M.2 universal enablement card kit (878783-B21), which is required for SATA M.2 support.
NOTE: Installation of this M.2 enablment card kit is limited to PCIe slot 1, 2, 3 or 4. Max. in ML350 Gen10 is one M.2 enablment card kit.
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required when this card kit is selected/installed for M.2 SSD support.
HPE ML350 Gen10 8SFF NVMe SSD Express Bay Enablement Kit with 2x4NVMe Risers and Support Cables
874569-B21
NOTE: This kit contains two x4 Direct Attach PCIe NVMe Riser Boards with each supporting up to 4 NVMe drives. When both Risers are installed, it supports 8 SFF NVMe drives.
NOTE: Max. support is one Gen10 ML350 NVMe 8SFF Exp Bay Kit (874569-B21) with installation limited to Box 2 based on cable routing requirement.
NOTE: SFF NVMe SSDs to be ordered separately.
NOTE: NVMe support is limited in SFF systems.
NOTE: NVMe drives require the addition of HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21).
Media/ODD Bay Kits
HPE ML350 Gen10 RDX/LTO Media Drive Support Cable Kit with Fan Blank for Long LTO
874570-B21
NOTE: Supporting cables to add additional RDX/tape devices for data backup or archiving.
NOTE: RDX/tape devices to be ordered separately.
HPE ML350 Gen10 Slimline ODD Bay and Support Cable Kit
874577-B21
NOTE: Mechanical converter with supporting cable.
HPE Networking
1 Gigabit Ethernet adapters
HPE Ethernet 1Gb 4-port 331T Adapter
647594-B21
HPE Ethernet 1Gb 2-port 332T Adapter
615732-B21
HPE Ethernet 1Gb 2-port 361T Adapter
652497-B21
HPE Ethernet 1Gb 4-port 366T Adapter
811546-B21
10 Gigabit Ethernet adapters
HPE Ethernet 10Gb 2-port 521T Adapter
867707-B21
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required to support this card.
HPE Ethernet 10Gb 2-port 530T Adapter
656596-B21
HPE Ethernet 10Gb 2-port 535T Adapter
813661-B21
HPE Ethernet 10Gb 2-port 562T Adapter
817738-B21
HPE Ethernet 10Gb 2-port 530SFP Adapter
652503-B21
HPE Ethernet 10Gb 2-port 562SFP+ Adapter
727055-B21
25 Gigabit Ethernet adapters
HPE Ethernet 4x25Gb 1-port 620QSFP28 Adapter
817762-B21
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required to support this card.
HPE Ethernet 10/25Gb 2-port 621SFP28 Adapter
867328-B21
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required to support this card.
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required to support this card.
HPE Power Supplies
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
865408-B21
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard C-14 power inlet connector.
HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit
865438-B21
NOTE: Flex Slot Titanium power supplies support power efficiency of up to 96% and include a standard C-14 power inlet connector.
HPE 800W Flex Slot Universal Hot Plug Low Halogen Power Supply Kit
865428-B21
NOTE: Flex Slot universal power supplies support power efficiency of up to 94% and support both 277VAC/380VDC power inputs.
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
865414-B21
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard C-14 power inlet connector.
HPE 800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply Kit
865434-B21
NOTE: Flex Slot -48VDC power supplies support power efficiency of up to 94%.
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
830272-B21
NOTE: Available in 94% efficiency.
HPE 500W Low Halogen FIO Power Supply Kit
837074-B21
NOTE: Support power efficiency of up to 92%.
HPE ML350 Gen10 Flex Slot Redundant Power Supply Cage Kit with Power Distribution Board
874571-B21
NOTE: Field upgrade only. Allowing field upgrade from the 500W standard PSU/non-RPS, non-hot-plug to support HPE Flex Slot RPS.
GPGPU Information
Part Number
Card
TDP
Qty. Support
PCIe Speed
ML350 Gen10 Configuration
8SFF
16SFF
16SFF+8NVMe
24SFF
4LFF
8LFF
12LFF
Q0V76A
HPE NVIDIA Quadro P6000 GPU Module
250W
4
Gen3
35C
35C
35C
35C
35C
35C
35C
Q0J62A
HPE NVIDIA Tesla M10 Quad GPU Module
225W
2
Gen3
35C
30C
30C
30C
35C
30C
30C
Q0V80A
HPE NVIDIA Tesla P40 24 GB Module
250W
4
Gen3
25C
20C
20C
20C
25C
20C
20C
NOTE: Please check the total power requirement of your selected configuration with the GPU(s) supported in this platform with the HPE Power Advisor Tool located at http://www.hpe.com/info/hppoweradvisor.
NOTE: The ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required for all GPU installations. (Note, the redundant fan kit ships as standard with the two 2P Performance models and the Rack CTO).
NOTE: Mixing of GPUs is not supported.
NOTE: These GPUs are not recommended for use in office environment especially under stress mode when system fans are running at full speed.
NOTE: HPE ML350 Gen10 GPU Ext Power Cable Kit (877628-B21) is required for GPU TDP larger than 75W.
HPE Computation and Graphics Accelerators
HPE NVIDIA Quadro P6000 Graphics Accelerator
Q0V76A
NOTE: HPE ML350 Gen10 GPU Ext Power Cable Kit (877628-B21) is required.
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required.
NVIDIA Tesla M10 Quad GPU Module
Q0J62A
NOTE: HPE ML350 Gen10 GPU Ext Power Cable Kit (877628-B21) is required.
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required.
HPE NVIDIA Tesla P40 24GB Computational Accelerator
Q0V80A
NOTE: HPE ML350 Gen10 GPU Ext Power Cable Kit (877628-B21) is required.
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required.
Graphics Cable Kits
HPE ML350 Gen10 GPU External Power Cable Kit
877628-B21
NOTE: This kit consists of two external power cables to feed power to GPU modules with TDP larger than 75W.
HPE Cooling Options
HPE ML350 Gen10 Redundent Fan Cage Kit with 4 Fan Modules
874572-B21
NOTE: This kit is required for elevated Ambient temperature environments.
NOTE: Add add’l 4x hot-plug fans which are installed in the fan cage to get N+1 fan redundancy and advanced cooling.
NOTE: The performance 2P BTO models and the Rack CTO model will already include this kit to include 6 fans total.
NOTE: The ML350 Gen10 Redundant Fan Kit (874572-B21) is required for one of the following configurations or situations:
1. 2P configuration.
2. When the unit is configured to use in Rack mode.
3. When front storage is fully populated with (3) 4LFF or (3) 8SFF drive cages or (2) LFF or SFF drive cages along with (2) media bays and (1) DVD.
4. When ML350 Gen10 is used in ASHRAE 3 or 4 environment.
5. When the unit is configured with higher RPM SAS HDDs (10K, 15K or higher).
6. When the unit is configured with NVMe Express Bay for NVMe SSD support.
7. When M.2 is selected.
8. The ML350 Gen10 Redundant Fan Cage Kit is also needed to support certain higher end PCIe expansion cards for example, GPU (Graphic Processing Unit), advanced PCIe accelerators, InfiniBand cards, higher-end network adapters and P816i-a controller.
NOTE: Please refer to the User Guide for special configuration scenarios where the redundant fan option is required but does not provide redundancy function.
Additional Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for additional information.
Embedded Management
HPE iLO Advanced
HPE iLO Advanced including 1yr 24×7 Technical Support and Updates E-LTU
E6U59ABE
HPE iLO Advanced including 1yr 24×7 Technical Support and Updates 1-server LTU
512485-B21
HPE iLO Advanced including 1yr 24×7 Technical Support and Updates Flexible Quantity LTU
512486-B21
HPE iLO Advanced including 1yr 24×7 Technical Support and Updates Tracking LTU
512487-B21
HPE iLO Advanced including 3yr 24×7 Technical Support and Updates E-LTU
E6U64ABE
HPE iLO Advanced including 3yr 24×7 Tech Support and Updates 1-server LTU
BD505A
HPE iLO Advanced including 3yr 24×7 Tech Support and Updates Flexible Quantity LTU
BD506A
HPE iLO Advanced including 3yr 24×7 Tech Support and Updates Tracking LTU
BD507A
HPE Converged Infrastructure Management Software
HPE OneView Physical Media Kit LTU
E5Y37A
HPE OneView including 3yr 24×7 Support Physical 1-server LTU
E5Y34A
HPE OneView including 3yr 24×7 Support Flexible Quantity E-LTU
E5Y35AAE
HPE OneView w/o iLO including 3yr 24×7 Support 1-server LTU
P8B24A
HPE OneView w/o iLO including 3yr 24×7 Support Track 1-server LTU
P8B25A
HPE OneView w/o iLO including 3yr 24×7 Support Flexible Quantity E-LTU
P8B26AAE
NOTE: Licenses ship without media. The HPE OneView Media Kit can be ordered separately, or can be downloaded.
HPE Security
HPE Trusted Platform Module 2.0 Kit
872108-B21
NOTE: HPE Trusted Platform Module 2.0 option works with Gen10 servers with UEFI Mode not Legacy Mode. It is not compatible with HPE ProLiant Gen8 servers or earlier generation variants.
NOTE: HPE server systems can have a TPM module (of any type) installed only once. It cannot be replaced with any other TPM module.
NOTE: There is a FIO setting to allow this TPM module to operate in a TPM 1.2 mode (872108-B21).
HPE Smart Array Controllers
The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed breakout of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10 Controllers Data Sheet.
Performance RAID Controllers
NOTE: All performance RAID controllers are supported by the HPE Smart Storage Battery (875241-B21), which supports multiple devices and is sold separately.
HPE Smart Array P816i-a SR Gen10 (16 Internal Lanes/4GB Cache/SmartCache) 12G SAS Modular Controller
804338-B21
NOTE: Does not occupy a PCIe expansion slot and includes SmartCache license.
NOTE: HPE ML350 Gen10 Redundant Fan Cage Kit (874572-B21) is required for P816i-a.
NOTE: For information on the HPE Smart Array P816i-a SR Gen10 Controller please refer to their QuickSpecs.
HPE Smart Array P408i-a SR Gen10 (8 Internal Lanes/2GB Cache) 12G SAS Modular Controller
804331-B21
NOTE: Does not occupy a PCIe expansion slot.
NOTE: For information on the HPE Smart Array P408i-a SR Gen10 Controller please refer to their QuickSpecs.
HPE Smart Array P408i-p SR Gen10 (8 Internal Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller
830824-B21
NOTE: For information on the HPE Smart Array P408i-p SR Gen10 Controller please refer to their QuickSpecs.
HPE Smart Array P408e-p SR Gen10 (8 External Lanes/4GB Cache) 12G SAS PCIe Plug-in Controller
804405-B21
NOTE: For information on the HPE Smart Array P408e-p SR Gen10 Controller please refer to their QuickSpecs.
Essential RAID Controllers
HPE Smart Array E208i-a SR Gen10 (8 Internal Lanes/No Cache) 12G SAS Modular Controller
804326-B21
NOTE: Does not occupy a PCIe expansion slot.
NOTE: For information on the HPE Smart Array E208i-a SR Gen10 Controller please refer to their QuickSpecs.
HPE Smart Array E208i-p SR Gen10 (8 Internal Lanes/No Cache) 12G SAS PCIe Plug-in Controller
804394-B21
NOTE: For information on the HPE Smart Array E208i-p SR Gen10 Controller please refer to their QuickSpecs.
HPE Smart Array E208e-p SR Gen10 (8 External Lanes/No Cache) 12G SAS PCIe Plug-in Controller
804398-B21
NOTE: For information on the HPE Smart Array E208e-p SR Gen10 Controller please refer to their QuickSpecs.
HPE Cable Options and SAS Expander Kit
HPE ML350 Gen10 Embedded SATA Cable Kit for LFF Configuration
877578-B21
HPE ML350 Gen10 Embedded SATA Cable Kit for SFF Configuration
877579-B21
HPE ML350 Gen10 AROC Mini-SAS Cable Kit for LFF Configuration
874573-B21
HPE ML350 Gen10 AROC Mini-SAS Cable Kit for SFF Configuration
HPE ML350 Gen10 12Gb SAS Expander Card Kit with Cables
874576-B21
NOTE: For details on cabling options, additional information available here: Cabling Matrix.
Optional Software
HPE Smart Array SR Secure Encryption (Data at Rest Encryption/per Server Entitlement) E-LTU
Q2F26AAE
HPE Smart Array SR SmartCache (Single Key/Single Server) LTU
D7S26A
HPE Smart Array SR SmartCache (Single Key/Multiple Servers) LTU
D7S27A
HPE Smart Array SR SmartCache (Single Key/Multiple Servers) E-LTU
D7S27AAE
NOTE: SmartCache is offered on HPE Smart Array performance RAID controllers and comes standard (no licensing is required) if the HPE Smart Array P816i-a SR Gen10 Controller is installed in the server.
NOTE: Provides backup power for multiple HPE Smart Array controllers or other devices. Is required with performance RAID controllers.
HPE Tape Backup
NOTE: Internal half-height (5.25”) tape devices are supported in ML350 Gen10 and require the HPE ML350 Gen10 Media Drive Support Kit (874570-B21).
NOTE: Installation of the internal LTO tape drive is limited in media bay 1.
NOTE: For the complete range of tape drives, autoloaders, libraries and media see: https://www.hpe.com/us/en/storage/storeever-tape-storage.html. For hardware and software compatibility of Hewlett Packard Enterprise tape backup products http://www.hpe.com/storage/BURAcompatibility.
HPE StoreEver 1/8 G2 LTO-5 Ultrium 3000 SAS Tape Autoloader
BL536B
HPE StoreEver LTO-6 Ultrium 6250 Tape Drive in a 1U Rack Mount Kit
C0L99A
HPE StoreEver 1U SAS Rack Mount Kit
AE459B
HPE StoreEver Mini-SAS High Density to 4-lane Mini-SAS External Fanout 2m Cable
K2R09A
HPE StoreEver Mini-SAS High Density to 4-lane Mini-SAS External Fanout 4m Cable
K2R10A
HPE Storage Options
Emulex Fibre Channel HBAs
HPE StoreFabric SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter
Q0L13A
HPE StoreFabric SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter
Q0L14A
HPE StoreFabric SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter
Q0L11A
HPE StoreFabric SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter
Q0L12A
QLogic Fibre Channel HBAs
HPE StoreFabric SN1100Q 16Gb Single Port Fibre Channel Host Bus Adapter
P9D93A
HPE StoreFabric SN1100Q 16Gb Dual Port Fibre Channel Host Bus Adapter
P9D94A
HPE StoreFabric SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter
P9M75A
HPE StoreFabric SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
P9M76A
Converged Network Adapters
HPE StoreFabric CN1100R Dual Port Converged Network Adapter
QW990A
HPE StoreFabric CN1100R 10GBASE-T Dual Port Converged Network Adapter
N3U52A
NOTE: For the complete listing of Fibre Channel Host Bus Adapters for Windows 2000, Windows Server 2003 and Linux, please see: https://www.hpe.com/us/en/product-catalog/storage/storage-adapters.hits-12.html.
HPE Racks
NOTE: Please see the HPE Advanced Series Racks QuickSpecs for information on additional racks options and rack specifications.
NOTE: Please see the HPE Enterprise Series Racks QuickSpecs for information on additional racks options and rack specifications.
NOTE: Please see the HPE Standard Series Racks QuickSpecs for information on additional racks options and rack specifications.
HPE Power Distribution Units (PDUs)
NOTE: Please see the HPE Basic Power Distribution Units (PDU) QuickSpecs for information on these products and their specifications.
NOTE: Please see the HPE Metered Power Distribution Units (PDU) QuickSpecs for information on these products and their specifications.
NOTE: Please see the HPE Intelligent Power Distribution Unit (PDU) QuickSpecs for information on these products and their specifications.
NOTE: Please see the HPE Metered and Switched Power Distribution Units (PDU) QuickSpecs for information on these products and their specifications.
HPE Uninterruptible Power Systems (UPS)
HPE T750 G4 NA/JP Uninterruptible Power System
J2P85A
HPE T1000 G4 NA/JP Uninterruptible Power System
J2P86A
HPE T1500 G4 NA/JP Uninterruptible Power System
J2P87A
HPE T750 G4 INTL Uninterruptible Power System
J2P88A
HPE T1000 G4 INTL Uninterruptible Power System
J2P89A
HPE T1500 G4 INTL Uninterruptible Power System
J2P90A
NOTE: To learn more, please visit the HPE Uninterruptible Power Systems (UPS) web page.
NOTE: Please see the HPE DirectFlow Three Phase Uninterruptible Power System QuickSpecs for information on these products and their specifications.
NOTE: Please see the HPE Line Interactive Single Phase UPS QuickSpecs for information on these products and their specifications.
HPE Rack Options
NOTE: Please see the HPE KVM Switches web page for information on these products and their specifications.
Rail Kits
NOTE: Ball bearing and Easy Install rail kits contain telescoping rails which allow for in-rack serviceability.
NOTE: To assist in the installation of the server into the rack an optional installation tool is available by contacting your local services representative (695539-001).
CAUTION: Hewlett Packard Enterprise recommends that a minimum of two people are required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.
HPE ML Gen10 Tower to Rack Conversion Kit with Sliding Rail Rack Shelf and Cable Management Arm
874578-B21
NOTE: Easy install rack rail tray which takes up 1U height in a standard rack facility. This kit is supported in both ML350 and ML110 Gen10 for tower to rack conversion. This kit includes CMA and is shipped as standard in the 2P Performance Rack SKU and SFF Rack CTO.
HPE USB and SD Options
HPE Enterprise Mainstream Flash Media Kits for Memory Cards
HPE 32GB microSD Mainstream Flash Media Kit
700139-B21
HPE 8GB microSD Enterprise Mainstream Flash Media Kit
726116-B21
HPE 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
737953-B21
HPE Dual 8GB microSD Enterprise Midline USB Kit
741279-B21
Memory
Memory Population guidelines
General Memory Population Rules and Guidelines:
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two-processor system, only half of the DIMM slots are available.
To maximize performance, it is recommended to balance the total memory capacity between all installed processors.
When two processors are installed, balance the DIMMs across the two processors.
White DIMM slots denote the first slot to be populated in a channel.
Mixing of DIMM types (UDIMM, RDIMM, and LRDIMM) is not supported.
The maximum memory speed is a function of the memory type, memory configuration, and processor model.
The maximum memory capacity is a function of the number of DIMM slots on the platform, the largest DIMM capacity qualified on the platform, the number and model of installed processors qualified on the platform.
For details on the HPE Server Memory Options Population Rules, visit:
http://www.hpe.com/docs/memory-population-rules.
To realize the performance memory capabilities listed in this document, HPE DDR4 SmartMemory is required. For additional information, please see the HPE DDR4 SmartMemory QuickSpecs.
NOTE: The maximum memory speed is a function of the memory type, memory configuration, and processor model.
NOTE: The 128GB LRDIMM will be available post launch.
For details on the HPE Server Memory speed, visit: https://www.hpe.com/docs/memory-speed-table.
Standard and Maximum Memory Capacity (Pre-configured Models)
Pre Configured
Models
Standard Memory
Maximum Memory Plus Optional Memory
Standard Memory Replaced with Optional Memory
3104
8GB (1×8 GB RDIMM SR)
192 GB (24x 8 GB)
3072 GB (24x 128 GB)
3106
16 GB (1×16 GB RDIMM SR)
384 GB (24x 16 GB)
3072 GB (24x 128 GB)
4110
16 GB (1×16 GB RDIMM SR)
384 GB (24x 16 GB)
3072 GB (24x 128 GB)
4114
32 GB (2×16 GB RDIMM SR)
384 GB (24x 16 GB)
3072 GB (24x 128 GB)
5118
32 GB (2×16 GB RDIMM SR)
384 GB (24x 16 GB)
3072 GB (24x 128 GB)
NOTE: 128 GB coming 2H 2017.
DDR4 memory options part number decoder
NOTE: Capacity references are rounded to the common gigabyte (GB) values.
8GB = 8,192 MB 16GB = 16,384 MB 32GB = 32,768 MB 64GB = 65,536 MB For more information on memory, please see the Memory Quickspecs: HPE DDR4 SmartMemory.
Storage
4 LFF non-hot-plug drive model:
Tower – shown with the tower feet.
1 x 4 LFF SAS/SATA non-hot-pluggble HDD/SSD Cage Kit in Box 3.
HDD Cage Blank in Box 2.
Media Bay Blanks (2) and DVD blank (1) in Box 1.
8 LFF non-hot-plug drive + media bay (2) and DVD (1) model:
1x 8 SFF NVMe Express Bay Kit in Box 2 for optional NVMe PCIe SSD, up to 8.
8 SFF hot-plug drive + 8 NVMe SSD + media bay (2) and DVD (1) model:
Tower – shown without the tower feet.
1x 8 SFF SAS/SATA hot-pluggble HDD/SSD Cage Kit
1x 8 SFF NVMe Express Bay Kit in Box 2 for optional NVMe PCIe SSD, up to 8
HH Media Bay up to 2 and/or 1 DVD in Box 1.
Technical Specifications
System Unit
Dimensions
46.25 (H) x 64.8 (D) x 17.4 (W) cm
18.2 (H) x 25.51 (D) x 6.85 (W) in
Tower
17.4 (H/4U) x 64.8 (D) x 44.5 (W) cm 6.85 (H) x 25.51 (D) x 17.52 (W) in
Rack – System only
4.445 (H/1U) x 69.2 (D/without CMA. Depth with CMA: 83.5) x 45.2 (W) cm
1.75 (H/1U) x 27.23 (D/without CMA. Depth with CMA: 32.89) x 17.795 (W) in
Tower-to-Rack Conversion Kit (1U)
Weight (approximate)
21 kg
46.30 lb
Minimum: 8 SFF or 4LFF chassis with 1x SFF or LFF HDD and HDD blanks, 1x HDD Drive Cage blank, 2x Media Bay blanks, 1x DVD bay blank, 1x processor including standard heatsink, 2 DIMMs, 1x power supply (plus blank), 1x Flexible Smart Array (AROC), Cables for the above.
42 kg
92.59 lb
Maximum – fully loaded system: 24 SFF or 12 LFF hard drives, 4 DW GPUs (or 8 standard PCIe expansion cards), 2x processors including 2 performance heatsinks, 24 DIMMs, 2x power supplies, 1x Flexible Smart Array (AROC), Cables for the above.
Input Requirements (per power supply)
Rated Line Voltage
100 to 120 VAC
200 to 240 VAC
BTU Rating
Maximum
For 800W Power Supply: 3067 BTU/hr (at 100 VAC), 2958 BTU/hr (at 200 VAC), 2949 BTU/hr (at 240 VAC)
For 500W Power Supply: 1902 BTU/hr (at 100 VAC), 1840 BTU/hr (at 200 VAC), 1832 BTU/hr (at 240 VAC)
For 1600W Power Supply: 5918 BTU/hr (at 200 VAC), 5884 BTU/hr (at 240 VAC)
Power Supply Output (per power supply)
Rated Steady-State Power
For 1600W Power Supply: 1600W (at 240 VAC), 1600W (at 240 VAC)
For 800W Power Supply: 800W (at 100 VAC), 800W (at 240 VAC), 800W (at 240 VAC)
For 500W Power Supply: 500W (at 100 VAC), 500W (at 240 VAC), 500W (at 240 VAC)
Maximum Peak Power
For 1600W Power Supply: 1600W (at 200 to 240 VAC), 1600W (at 240 VAC)
For 800W Power Supply: 800W (at 100 to 127 VAC), 800W (at 200 to 240 1VAC), 800W (at 240 VAC)
For 500W Power Supply: 500W (at 100 to 127 VAC), 500W (at 200 to 240 VAC), 500W (at 240 VAC)
System Inlet Temperature
Standard Operating Temperature
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 20°C/hr (36°F/hr). The upper limit and rate of change may be limited by the type and number of options installed.
System performance during standard operating support may be reduced if operating with a fan fault or above 30°C (86°F).
Extended Ambient Operating Temperature
For approved hardware configurations, the supported system inlet range is extended to be: 5° to 10°C (41° to 50°F) and 35° to 40°C (95° to 104°F) at sea level with an altitude derating of 1.0°C per every 175 m (1.8°F per every 574 ft) above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft). The approved hardware configurations for this system are listed at the URL:
http://www.hpe.com/servers/ashrae
For approved hardware configurations, the supported system inlet range is extended to be: 40° to 45°C (104° to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft) above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft). The approved hardware configurations for this system are listed at the URL:
http://www.hpe.com/servers/ashrae
System performance may be reduced if operating in the extended ambient operating range or with a fan fault.
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative Humidity
Operating
8% to 90% – Relative humidity (Rh), 28°C maximum wet bulb temperature, non-condensing.
(non-condensing)
Non-operating
5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing..
Altitude
Operating
3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Acoustic Noise
Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). The listed sound levels apply to standard shipping configurations. Additional options may result in increased sound levels, for example, higher-end graphic processing units (GPU), NVMe SSD or NVMe M.2. Please have your HPE representative provide information from the HPE EMESC website for further technical details regarding the configurations listed below.
Idle
LWAd
4.0 B Entry
3.9 B Base
4.4 B Perf
LpAm
28 dBA Entry
27 dBA Base
31 dBA Perf
Operating
LWAd
4.2 B Entry
4.3 B Base
4.4 B Perf
LpAm
29 dBA Entry
30 dBA Base
32 dBA Perf
NOTE: Acoustics levels presented here are generated by the test configuration only. Acoustics levels will vary depending on system configuration. Values are subject to change without notification and are for reference only.
NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.
NOTE: The Listed sound levels apply to standard shipping configurations. Additional options may result in increased sound levels, for example, higher-end graphic processing units (GPU), NVMe SSD or NVMe M.2.
Emissions Classification (EMC) – Regulatory Information
To view the regulatory information for your product, view the Safety and Compliance Information for Server, Storage, Power, Networking, and Rack Products, available at the Hewlett Packard Enterprise Support Center:
Hewlett Packard Enterprise offers end-of-life product return, trade-in, and recycling programs, in many geographic areas, for our products. Products returned to Hewlett Packard Enterprise will be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard Enterprise web site. These instructions may be used by recyclers and other WEEE treatment facilities as well as Hewlett Packard Enterprise OEM customers who integrate and re-sell Hewlett Packard Enterprise equipment.
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.
اولین نفری باشید که دیدگاهی را ارسال می کنید برای “HPE ProLiant ML350 Gen10” لغو پاسخ
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.